INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Genre:||Health and Food|
|Published (Last):||7 February 2013|
|PDF File Size:||2.70 Mb|
|ePub File Size:||20.79 Mb|
|Price:||Free* [*Free Regsitration Required]|
The history and age of interlins steel and the method of working can have a significant effect on the paint consumption. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
Actual safety measures are dependant on application methods and work environment.
Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. Interline A two pack epoxy holding primer.
Consult your local International Paint representative for specific recommendations. Consult your International Paint representative for specific recommendations. Consult your International Paint representative for the system best suited for the surfaces to be protected. It is good working practice to periodically flush out spray equipment during the course of the working day. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
Based on this, products supplied in different territories may not be approved to all of the standards listed above. Use International GTA only in exceptional circumstances.
Recommended Tip Range 0. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. Clean all equipment immediately after use with International GTA Thoroughly flush all equipment with International GTA Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Marine Coatings Marine chemicals Marine lubricants. Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays. DO NOT thin more than allowed inferline local environmental legislation.
Interline | Litnobiles
Use in accordance with the standard Worldwide Marine Specifications. A two pack epoxy holding primer. Interllne coats may be required to achieve specified film thickness. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates.
All surfaces to be coated should be clean, dry and free from contamination. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification intetline performance and use of the coating. International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried.
Consult your International Paint representative for details. Application by brush is recommended for small areas only. Material is supplied in 2 containers as a unit. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim interllne the exhibited published test results, or any iterline tests, accurately represent results found in all field environments.
Store in dry, shaded conditions away from sources of heat and ignition. Take precautions to avoid skin and eye contact ie.
Application by roller is recommended for small areas only. Subject to re-inspection thereafter. These may be subject to variation depending on 92 such as differences in colour and normal manufacturing tolerances. Apply in good weather. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures.
Products Marine Coatings Marine chemicals Marine lubricants.